Specifications

Features

•

For use with valves with a diverter

•

Complements Pinstripe

Suite

•

Lever handle

•

Requires a Rite-Temp

pressure-balancing valve

Material

•

Premium material construction

Installation

•

Wall-mount

Required Accessories

Option 1

K-11748-K Pressure-Balancing Valve With Diverter Less Stops

Option 2

K-11748-KS Pressure-Balancing Valve With Diverter and Stops

For complete listing of available colors, go to

kohler.com.

Codes/Standards

ASME A112.18.1/CSA B125.1

ASSE 1016

ADA

ICC/ANSI A117.1

KOHLER

Faucet Lifetime Limited

Warranty

See website for detailed warranty information.

Product Specification

Valve trim shall be of premium material

construction. Valve trim shall feature push-button

diverter and lever handle. Valve trim shall be

KOHLER model K-T98757-4A.

USA/Canada: 1-800-4KOHLER (1-800-456-4537)

www.kohler.com

10-3-2014 01:47

Pinstripe

Valve Trim Set

K-T98757-4A

PAGE 1
Pinstripe® Valve Trim Set K-T98757-4A Features • • • • For use with valves with a diverter Complements Pinstripe® Suite Lever handle Requires a Rite-Temp® pressure-balancing valve Material • Premium material construction Installation • Wall-mount Required Accessories Option 1 K-11748-K Pressure-Balancing Valve With Diverter Less Stops or Option 2 K-11748-KS Pressure-Balancing Valve With Diverter and Stops For complete listing of available colors, go to kohler.com. Codes/Standards ASME A112.18.
PAGE 2
Pinstripe® Valve Trim Set K-T98757-4A 3" Technical Information Installation Notes All measurements are nominal. Pressure: 45 psi (3.1 bar) Install this product according to the installation guide. Avoid cross-flow conditions. Do not install shut-off device on either valve outlet. Cap the shower outlet if deck-mount spout, diverter, or handshower is connected to the spout outlet. Install straight pipe or tube drop of 7" (178 mm) to 18" (457 mm) with single elbow between the valve and wall-mount spout.