Specification

ManualsBrandsKOHLER ManualsBathDevonshire Rite-Temp Single-Handle 1-Spray Tub and Shower Faucet in Brushed Nickel (Valve Not Included)

Features

•

Metal construction

•

Brass valve bodies

•

Rite-Temp

pressure-balancing diaphragm design

•

High-temperature limit setting for added safety

•

Pressure-balancing mechanism of one-piece

diaphragm cartridge design for ease of maintenance

•

Mixing valve cycles from ″cold″ to ″hot″

•

Intended for use with Rite-Temp

or HiFlow

Rite-Temp

valves

•

Includes showerhead with arm and ﬂange, faceplate

with handle, and 5-1/4″ (133 mm) diverter spout with

NPT or slip-ﬁt connection

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

•

ASME A112.18.1/CSA B125.1

PRESSURE-BALANCING

BATH/SHOWER VALVE TRIM

K-T395

ALSO K-T396, K-T397

Colors/Finishes

•

CP: Polished Chrome

•

PB: Vibrant

Polished Brass

•

Other: Refer to Price Book for additional colors/ﬁnishes

Speciﬁed Model

Separate Trim and Rite-Temp

Valve: For complete valve, both valve trim and Rite-Temp

valve must be speciﬁed.

Model Description Colors/Finishes

K-T395-4 Shower and valve trim with NPT diverter spout ❑ CP ❑ PB ❑ Other ____

K-T395-4S Shower and valve trim with slip-ﬁt diverter spout (shown) ❑ CP ❑ PB ❑ Other ____

K-T396-4 Shower and valve trim ❑ CP ❑ Other ____

K-T397-4 Valve trim ❑ CP ❑ PB ❑ Other ____

Rite-Temp

valve must be ordered to complete faucet.

Applicable Bath Spout

K-373 Non-diverter bath spout ❑ CP ❑ PB ❑ Other ____

K-373-S Slip-ﬁt non-diverter bath spout ❑ CP ❑ PB ❑ Other ____

K-389 Diverter bath spout ❑ CP ❑ PB ❑ Other ____

K-389-S Slip-ﬁt diverter bath spout ❑ CP ❑ PB ❑ Other ____

Product Speciﬁcation

The Rite-Temp

pressure-balancing single-control bath and shower valve shall be made of metal construction with brass valve

bodies. Valve shall mix the water from the ″off″ position, through the ″cold″ to the ″hot″, and include a high-temperature limit

setting for added safety. Product shall feature pressure-balancing mechanism of one-piece diaphragm cartridge design for ease

of maintenance and be intended for use with Rite-Temp or HiFlow Rite-Temp valves. Bath and shower valve shall include

showerhead with arm and ﬂange, faceplate with handle, and 5-1/4″ (133 mm) diverter spout with NPT or slip-ﬁt connection.

Valve shall be Kohler Model K-___-___-___ with K-___-___-NA Rite-Temp

valve.

DEVONSHIRE

RITE-TEMP

Page 1 of 2

1012741-4-

USA/Canada: 1-800-4KOHLER

(1-800-456-4537)

www.kohler.com

Summary of content (2 pages)

PAGE 1
DEVONSHIRE® RITE-TEMP® Features • • • • • • • • PRESSURE-BALANCING BATH/SHOWER VALVE TRIM Metal construction Brass valve bodies Rite-Temp® pressure-balancing diaphragm design High-temperature limit setting for added safety Pressure-balancing mechanism of one-piece diaphragm cartridge design for ease of maintenance Mixing valve cycles from ″cold″ to ″hot″ Intended for use with Rite-Temp® or HiFlow Rite-Temp® valves Includes showerhead with arm and flange, faceplate with handle, and 5-1/4″ (133 mm) diverter
PAGE 2
DEVONSHIRE® RITE-TEMP® Technical Information Required Accessories K-304-* Rite-Temp® valve OR ❑ NA K-2971-KS HiFlow Rite-Temp valve with stops ❑ NA *For a complete listing of all the Rite-Temp valves, refer to the K-304-* Specification sheet or Roughing-In sheet. Installation Notes Optional Accessories 88526 HiFlow Rite-Temp® thin wall installation kit 1030932 Deep roughing-in kit for Rite-Temp® valve (lever handles) ❑ CP ❑ NA ❑ Other __ Install this product according to the installation guide.