Dimensions Guide

Ø 6-3/8" (162 mm)
K-2971-KS,
K-304 Valves
K-8300 Valve
Series
Finished Wall
*If 3-5/8" (92 mm) to
4-3/8" (111 mm) use
deep roughing-in kit.
2-1/2"
(64 mm)
5" (127 mm)
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
NoDrain included:
NOTICE: Risk of product damage. Long screws
for installing trim can damage the K-2971-KS
valve. Consult the trim installation guide to verify
if the thin wall installation kit is needed.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and the wall-mount spout.
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-30-2020 07:36 - US/CA/LM/MX
Components
™
Rite-Temp
®
shower valve trim
K-TS78015-4