Rough In Guide

Product Information
Applicable product:
Bath whirlpool with integral apron, left
drain
K-1122-LA
Bath whirlpool with integral apron, right
drain
K-1122-RA
Fixture*:
Bathing well:
Basin area, bottom 45-1/8″ (114.6 cm) x 19-11/16″
(50 cm)
Basin area, top 52-3/4″ (134 cm) x 25-5/16″
(64.3 cm)
Weight 135 lbs (61.2 kg)
To overflow:
Water depth 15″ (38.1 cm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Pump is supplied with 24″ (61 cm) grounding-type plug-in
cord.
Required accessories:
Clearflo slotted overflow brass bath drain OR K-7271
Clearflo slotted overflow bath drain – PVC
pipe
K-7272
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(61 cm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 49 lbs/square foot (240 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
1/2" (1.3 cm) R.
1-1/2"
Bath Drain
60" (152.4 cm)
32" (81.3 cm)
No change in measurements if connected
with drain illustrated. (K-7272)
1-1/4"
(3.2 cm)
Integral Flange
Detail
19"
(48.3 cm)
3/4"
(1.9 cm)
2-1/2"
(6.4 cm)
11-1/4"
(28.6 cm)
1-1/4"
(3.2 cm)
16"
(40.6 cm)
4-1/8"
(10.5 cm)
Roughing-In
K-1122-LA, K-1122-RA
ARCHER
TM
5’ (1.5 m) BATH WHIRLPOOL WITH INTEGRAL APRON
ARCHERTM 5’ (1.5 m) BATH WHIRLPOOL WITH INTEGRAL APRON
1071358-1-
D