Dimensions and Measurements

Technical Information
Fixture*:
Bathing well
Basin area, bottom 51-3/8″ (130.5 cm) x 21″ (53.3 cm)
Basin area, top 64-1/2″ (163.8 cm) x 30-1/2″
(77.5 cm)
Weight 140 lbs (63.5 kg)
To overflow
Water depth 15″ (38.1 cm)
Capacity 72 gal (273 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Heater: kW V Hz A
1.5 120 60 12.5
Pump is supplied with 24″ (61 cm) grounding-type plug-in
cord.
Required Electrical Service
(2 required)
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control/Heater 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 43 lbs/square foot (210 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
36" (91.4 cm)
72" (182.9 cm)
3/4" (1.9 cm)
1-1/2"
Bath Drain
1/2" (1.3 cm) R.
19"
(48.3 cm)
1-1/4"
(3.2 cm)
No change in measurements if connected
with drain illustrated. (K-7272)
18"
(45.7 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
Integral Flange
Detail
4-1/8"
(10.5 cm)
Product Diagram
ARCHERTM
ARCHERTM 6’ (1.8 m) BATH WHIRLPOOL WITH HEATER
Page2of2
1071367-4-
E