Dimensions and Measurements

Technical Information
Fixture*:
Bathing well
Basin area 51-3/8″ (130.4 cm) x 21″ (53.3 cm)
Top area 64-1/2″ (163.8 cm) x 30-1/2″
(77.5 cm)
Weight 70 lbs (31.7 kg)
To overflow
Water depth 15″ (38.1 cm)
Capacity 72 gal (273 L)
* Approximate measurements for comparison only.
Drop-in cut-out 70-1/2″ (179.1 cm) x 34-1/2″ (87.7 cm)
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 39 lbs/square foot (189 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
This bath is designed for drop-in installation only. It is not
suited for use in a three wall alcove with an overhead shower.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
36" (91.4 cm)
72" (182.9 cm)
3/4" (1.9 cm)
No change in measurements if connected
with drain illustrated. (K-7272)
Drop-in Rim
Detail
1-1/2"
(3.8 cm)
18"
(45.7 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
19"
(48.3 cm)
1-1/2"
Bath Drain
4-1/8"
(10.5 cm)
Product Diagram
ARCHERTM
ARCHERTM 6’ (1.8 m) BATH
Page2of2
1071362-4-
C