Rough In Guide

Product Information
Applicable product:
Bath for drop-in installation K-1184
Bath with integral apron for alcove
installation – left drain (shown)
K-1184-LA
Bath with integral apron for alcove
installation – right drain
K-1184-RA
Fixture*:
Basin area:
Bathing well 42″ (1067 mm) x 20″ (508 mm)
Top area 51″ (1295 mm) x 24″ (610 mm)
To overflow:
Water depth 14″ (356 mm)
Capacity 60 gal (277.1 L)
Weight K-1184 70 lbs (31.8 kg)
K-1184-LA,
K-1184-RA
80 lbs (36.3 kg)
* Approximate measurements for comparison only.
Drop-in cut-out
[K-1184]
58″ (1473 mm) x 30″ (762 mm)
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 41
lbs/square foot (202 kg/square meter) loading.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
K-1184-LA/RA
K-1184-LA/RA K-1184
16"
(406 mm)
2-1/4"
(57 mm)
9"
(229 mm)
1-1/4"
(32 mm)
3"
(76 mm)
Ø 1-1/2"
2-1/2"
(64 mm)
1" (25 mm)
60" (1524 mm)
32" (813 mm)
Integral Flange
Detail
Drop-in
Rim Detail
1-1/4"
(32 mm)
1/2" (13 mm)
R. Max
1-1/2"
(38 mm)
20"
(508 mm)
18-1/2"
(470 mm)
Roughing-In
K-1184, K-1184-LA, K-1184-RA
DEVONSHIRE
®
BATH
DEVONSHIRE
®
BATH
1014141-1-
C