Rough In Guide

Product Information
Applicable product:
Lavatory without holes K-14282
Lavatory with 12-3/8″ (31.4 cm) centers K-14282-12
Lavatory without holes K-14283
Lavatory with 10″ (25.4 cm) centers K-14284
Fixture*:
Basin area 14″ (35.6 cm) D.
Water depth 5″ (12.7 cm)
Drain hole 1-3/4″ (4.4 cm) D.
Faucet holes 1-3/8″ (3.5 cm) D.
Spout hole 1-3/16″ (3 cm) D.
*Approximate measurements for comparison only.
Included components:
Adjustable linkage 40372
Cut-out template 86562-7
Installation Notes
Install this product according to the installation guide.
IMPORTANT! Due to the large size of the lavatory, a 21-1/8″
(53.7 cm) wide flat surface is required for installation on a
vanity top.
Lavatories without faucet holes require wall-mount faucets
with 7″ (17.8 cm) minimum spout length.
Supply dimensions are based on a 12″ (30.5 cm) riser which
may require cutting.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cut-out errors when the incorrect cut-out
template is used.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All
dimensions are nominal.
K-14284
1/2" (1.3 cm)
1-1/4" OD
14"
(35.6 cm)
3/8" Hot
4" (10.2 cm)
3/8" Cold
21" (53.3 cm)
10-5/8"
(27 cm)
20-7/8"
(53 cm)
6-7/8"
(17.5 cm)
5" (12.7 cm)
1-5/8" (4.1 cm)
2"
(5.1cm)
12-1/2"
(31.8 cm)
K-14282-12
K-14282
2"
(5.1 cm)
2-9/16"
(6.5 cm)
6-3/16"
(15.7 cm)
K-14283
Roughing-In
K-14282, K-14283, K-14284
CAMBER
®
ARTIST EDITIONS
COUNTERTOP LAVATORY
CAMBER
®
ARTIST EDITIONS COUNTERTOP LAVATORY
1010384-1-
C