Spec Sheet

G1/2
11-1/8"
(283 mm)
4-11/16"
(119 mm)
3"
(76 mm)
11-1/2"
(292 mm)
5-1/2"
(140 mm)
Ø 6"
(152 mm)
28"
(711 mm)
Ø 5-3/16"
(132 mm)
1/2"-14
NPT
Ø 2-1/2"
(64 mm)
Ø 7"
(178 mm)
4-5/16"
(110 mm)
3-3/16"
(81 mm)
2"
(51 mm)
Ø 2-1/4"
(57 mm)
60" (1524 mm)
Overall Length
K-2971-KS,
K-304 Valves
K-8300 Valve
Series
Finished Wall
*If 3-1/2" (89 mm) to
4-1/4" (108 mm) use
deep roughing-in kit.
G1/2
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
NoDrain included:
IMPORTANT! The slide bar must be mounted to
stud framing supports at both the top and bottom
Handshower:
1.75 gal/min (6.6 l/min)Rated maximum flow:
mounting locations. Plastic wall anchors will not
support the slide bar. Do not use or depend on
plastic wall anchors to attach the slide bar.
45 psi (3.1 bar)Pressure:
Showerhead/Body Spray:
Plumbing codes may require that an atmospheric
vacuum breaker be installed in-line to
handshowers. Consult with local codes.
1.75 gal/min (6.6 l/min)Rated maximum flow:
45 psi (3.1 bar)Pressure:
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and the wall-mount spout.
NOTICE: Risk of product damage. Long screws,
for installing trim, can damage the K-2971-KS
valve. Consult the trim installation guide to verify
if the thin wall installation kit (88526) is needed.
ADA, OBC compliant when installed to the
specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
12-24-2019 10:35 - US
Bancroft
®
Essentials showering package, 1.75 gpm
K-22179-G