Rough In Guide

Product Information
Applicable product:
Floor-mount bath filler – 36″ (91.4 cm) spout
height
K-8359
Floor-mount bath filler – 35″ (88.9 cm) spout
height
K-8361
Floor-mount bath filler – 37″ (94 cm) spout
height
K-8362
Product is ADA compliant when ADA
compliant handles are installed.
Required valve:
1/2″ high-flow ceramic disc valve system K-300-K
3/4″ high-flow ceramic disc valve system K-301-K
Bath filler spout shank K-411-K
Installation Notes
WARNING: Risk of personal injury. Do not use
the bath filler as a grab bar or support bar when
entering or exiting the bath. The bath filler is not
designed to support weight.
Install this product according to the installation guide.
1-1/4"
(3.2 cm)
2-1/2"
(6.4 cm) D.
Finished
Floor
7/16" (1.1 cm) Max
Finished Floor
Thickness Based on
Spout Base and
Locknut Adjustment
3-3/8"
(8.6 cm) D.
2-15/16" (7.5 cm) Min
3-9/16" (9 cm) Max
3/16"
(5 mm) Min
1-1/2"
(3.8 cm) Max
Finished
Wall
2x4 Wall
Reinforcement
Subflooring
1-1/4" (3.2 cm) Min
2-1/4" (5.7 cm) Max
14" (3.56 cm)
2-1/4"
(5.7 cm)
2" (5.1 cm)
Min Air Gap
Z
X
Y
20-7/16" (51.9 cm) 25" (63.5 cm)36" (91.4 cm)
18-1/2" (47 cm) 26" (66 cm)37" (94 cm)
16-1/2" (41.9 cm) 24" (61 cm)35" (88.9 cm)
K-8359
K-8361
K-8362
XZY
Roughing-In
K-8359, K-8361, K-8362
FLOOR-MOUNT BATH FILLER
FLOOR-MOUNT BATH FILLER
1006092-1-
E