Rough In Guide

Product Information
Applicable product:
Bath – left drain K-877
Bath – for use with custom storage, left drain K-877-S
Bath – right drain K-878
Bath – for use with custom storage, right
drain
K-878-S
Fixture*:
Bathing well:
Basin area, bottom 43-7/8″ (111.4 cm) x
20-15/16″ (53.2 cm)
Basin area, top 53-3/16″ (135.1 cm) x
23-5/16″ (59.2 cm)
Weight 275 lbs (124.7 kg)
To overflow:
Water depth 12-13/16″ (32.5 cm)
Capacity 49.5 gal (187.4 L)
* Approximate measurements for comparison only.
Required accessories:
Clearflo cable bath drain, less PVC tubing K-7214
Fitting/pipe kit K-7261
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for minimum of 54
lbs/square foot (262 kg/square meter) loading.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
Will comply with CSA B651 when installed per Clause 4.4.7
of the standard.
Will comply with OBC when installed per Clause 3.8.3.13.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
60" (152.4 cm)
30" (76.2 cm)
3" (7.6 cm)
11-7/8"
(30.2 cm)
4-15/16"
(12.5 cm)
No change in measurements if connected with drain
and fitting/pipe kit illustrated. (K-7214 and K-7261)
6-1/4"
(15.9 cm)
1"
(2.5 cm)
1/2"
(1.3 cm)
5/8"
(1.6 cm)
1/2"
(1.3 cm)
1/4"
(6 mm)
Front Flange Detail
32"
(81.3 cm)
14-1/4"
(36.2 cm)
15" (38.1 cm)
13-7/8"
(35.2 cm)
2-3/4"
(7 cm)
2" (5.1 cm)
16" (40.6 cm)
17-1/2"
(44.5 cm)
17"
(43.2 cm)
6-5/16"
(16 cm)
16-3/4"
(42.5 cm)
Rim Flange
Detail
Roughing-In
K-877, K-877-S, K-878, K-878-S
HIGHBRIDGE
TM
BATH
HIGHBRIDGETM BATH
1089498-1-
E