Product Card

KD110
ENGINE CHARACTERISTICS
JOHN DEERE
4045HF120
Turbo
L
4
4.48
Air/Air DC
106 x 127
17 : 1
1500
6.35
102
+/- 2.5%
16.6
GENERAL ENGINE DATA
Engine model
Engine type
Air inlet
Cylinders arrangement
Number of cylinders
Displacement (L)
Charge Air coolant
Bore (mm) x Stroke (mm)
Compression ratio
Speed (RPM)
Pistons speed (m/s)
Maximum stand-by power at rated
RPM (kW)
Frequency regulation, steady state (%)
BMEP (bar)
Governor type
Mechanical
COOLING SYSTEM
Radiator & Engine capacity (L)
20.2
Max water temperature (°C)
-
Outlet water temperature (°C)
-
Fan power (kW)
2.5
3.7
20
Fan air flow w/o restriction (m3/s)
Available restriction on air flow (mm
H2O)
Type of coolant
Glycol-Ethylene
Thermostat modulating range HT (°C) -
100
310
-
EMISSIONS
Emission PM (mg/Nm3) 5% O2
Emission CO (mg/Nm3) 5% O2
Emission HC+NOx (g/kWh)
Emission HC (mg/Nm3) 5% O2
26
545
283
EXHAUST
Exhaust gas temperature @ ESP 50Hz (°C)
Exhaust gas flow @ ESP 50Hz (L/s)
Max. exhaust back pressure (mm H2O)
750
FUEL
Consumption @ 110% load (L/h)
25.5
Consumption @ 100% load (L/h)
23.5
Consumption @ 75% load (L/h)
16.5
Consumption @ 50% load (L/h)
11.5
Maximum fuel pump flow (L/h)
108
13.5
1
5
-
OIL
Oil capacity (L)
Min. oil pressure (bar)
Max. oil pressure (bar)
Oil consumption 100% load (L/h)
Oil sump capacity (L)
12.5
64
11
HEAT BALANCE
Heat rejection to exhaust (kW)
Radiated heat to ambient (kW)
Heat rejection to coolant (kW)
36
625
AIR INTAKE
Max. intake restriction (mm H2O)
Intake air flow (L/s)
106
This document is not contractual - Kohler Co. reserves the right to modify any of the characteristics without notice,
in a constant effort to improve the quality of its products.
GBD5-03007 (KD110) 03/17