User Manual

8
This chart shows option codes (examples: SiM, EN04, TR31, etc.). Feature codes refer to specific option descriptions but are not part numbers for ordering purposes.
Contact your authorized distributor for ordering options for a given generator set.
Enclosures
M125 M126 M127, M128, M129 M226 M227, M228, M229 M230
General Specifications
Assembled soundproofing enclosure SiM SiM SiM SiM SiM SiM
Non-assembled soundproofing enclosure (supplied as a kit)(1) N/A SiK SiK N/A N/A N/A
Kohler cream beige standard color Standard Standard Standard Standard Standard Standard
Special color (lead time 8 weeks) CN08 CN08 CN08 CN08 CN08 CN08
Electrogalvanized steel panels before paint application protected by a rust-resistant
polyester powder coat
Standard Standard Standard Standard Standard Standard
Dichromate galvanized hardware and stainless steel rivets, polyamide or anodized
aluminum alloy hinges, seals provided by flexible joints between the body work
components
Standard Standard Standard Standard Standard Standard
Soundproofing foam between 20-50 mm thick Standard Standard Standard Standard Standard Standard
Bulk tank on day service tank N/A N/A N/A FD04 FD04 FD04
Fluid recovery tank Standard Standard Standard N/A N/A N/A
High containment double wall chassis N/A FD02 FD02 FD02 FD02 FD02
Safety
Lockable doors with a unique key Standard Standard Standard Standard Standard Standard
Lockable control unit porthole Standard Standard Standard Standard Standard Standard
Emergency stop button installed on outside of enclosure Standard Standard Standard Standard Standard Standard
Access to diesel, oil and battery behind lockable doors Standard Standard Standard Standard Standard Standard
Protective guard for rotating parts Standard Standard Standard Standard Standard Standard
Exhaust integrated into the enclosure Standard Standard Standard Standard Standard Standard
Horizontal exhaust discharge hood CN03 CN03 CN03 CN03 CN03 CN03
Remote connection terminal block for armored cables N/A CN06 CN06 CN06 CN06 N/A
Socket kit, 400-volt, 3-phase, plus neutral(2) CN04 CN04 CN04 N/A N/A N/A
Handling
Lifting ring (number of points) 1 1 1 1 2 2
Single base panel N/A N/A N/A CN05 CN05 CN05
Maintenance
Access doors on each side (number) 2+1 2+1 2+1 2+2 2+2 2+2
Oil drain pump EN04 EN04 EN04 EN04 EN04 EN06
Electric control unit accessible via a door Standard Standard Standard Standard Standard Standard
Trailers(3)
Road trailer with fixed drawbar and ball attachment TR10 TR10 N/A N/A N/A N/A
Road trailer with hinged drawbar and ring attachment, 68 x 42 mm TR11 TR11 TR11 TR11 N/A N/A
Pintle ring, 40 mm (DIN German) TR21 TR21 TR21 TR21 N/A N/A
Pintle ring, 76 mm TR25 TR25 TR25 TR25 N/A N/A
Ball (universal), 50 mm TR26 TR26 TR26 TR26 N/A N/A
Spare wheel kit TR31 TR31 TR31 TR31 N/A N/A
N/A Not available, TR21 Available at no additional cost, (1) This option requires special handling and installation, (2) Requires different protection, (3) Contact your authorized distributor for availability.
GENERATOR SET ENCLOSURES
M229 Enclosure
All KOHLER® generator sets are compliant with directive 2000/14/CE, and its
products are checked and validated by the approved laboratory CETIM.
STANDARD FEATURES AND OPTIONS