Product Card

KH330
ENGINE CHARACTERISTICS
GENERAL ENGINE DATA
Engine model
DOOSAN
Engine type
P126TI-II
Air inlet
Turbo
Cylinders arrangement
L
Number of cylinders
6
Displacement (L)
11.05
Charge Air coolant
Air/Air DC
Bore (mm) x Stroke (mm)
123 x 155
Compression ratio
17 : 1
Speed (RPM)
1500
Pistons speed (m/s)
7.75
Maximum stand-by power at rated
RPM (kW)
294
Frequency regulation, steady state (%)
+/- 0.5%
BMEP (bar)
19.4
Governor type
Electronic
COOLING SYSTEM
Radiator & Engine capacity (L)
50.5
Max water temperature (°C)
103
Outlet water temperature (°C)
-
Fan power (kW)
10
Fan air flow w/o restriction (m3/s) 5
Available restriction on air flow (mm
H2O)
-
Type of coolant
Glycol-Ethylene
Thermostat modulating state HT (°C) -
0.14
0.11
8.34
EMISSIONS
Emission PM (g/kWh)
Emission CO (g/kWh)
Emission HC+NOx (g/kWh)
Emission HC (mg/Nm3) 5% O2
EXHAUST
Exhaust gas temperature @ ESP 50Hz (°C)
590
Exhaust gas flow @ ESP 50Hz(L/s) 790
Max. exhaust back pressure (mm H2O)
600
FUEL
Consumption @ 110% load (L/h)
77.6
Consumption @ 100% load (L/h)
63.1
Consumption @ 75% load (L/h)
47
Consumption @ 50% load (L/h)
31.3
Maximum fuel pump flow (L/h)
270
OIL
Oil capacity (L)
25
Min. oil pressure (bar)
0.5
Max. oil pressure (bar)
10
Oil consumption 100% load (L/h)
0.1
Oil sump capacity (L) 23
HEAT BALANCE
Heat rejection to exhaust (kW)
254
Radiated heat to ambient (kW) 35
Heat rejection to coolant (kW)
105.6
AIR INTAKE
Max. intake restriction (mm H2O)
635
Intake air flow (L/s)
335
This document is not contractual - Kohler Co. reserves
the right to modify any of the characteristics without notice, in a constant effort to improve the quality of its products.
GBD5-05003 (KH330) 03/17
-