Product Card

KH630
ENGINE CHARACTERISTICS
DOOSAN
DP180LA
Turbo
V
10
128 x 142
15 : 1
552
+/- 0.5%
22
GENERAL ENGINE DATA
Engine model
Engine type
Air inlet
Cylinders arrangement
Number of cylinders
Displacement (L)
Charge Air coolant
Bore (mm) x Stroke (mm)
Compression ratio
Speed (RPM)
Pistons speed (m/s)
Maximum stand-by power at rated
RPM (kW)
Frequency regulation, steady state (%)
BMEP (bar)
Governor type
Electronic
COOLING SYSTEM
Radiator & Engine capacity (L)
Max water temperature (°C)
Outlet water temperature (°C)
Fan power (kW)
Fan air flow w/o restriction (m3/s)
Available restriction on air flow (mm
H2O)
Type of coolant
Thermostat modulating range HT (°C) -
EMISSIONS
Emission PM (g/kWh)
Emission CO (g/kWh)
Emission HC+NOx (g/kWh)
Emission HC (mg/Nm3) 5% O2
562
1767
EXHAUST
Exhaust gas temperature @ ESP 50Hz (°C)
Exhaust gas flow @ ESP 50Hz (L/s)
Max. exhaust back pressure (mm H2O)
600
FUEL
Consumption @ 110% load (L/h) 135.4
Consumption @ 100% load (L/h) 123.6
Consumption @ 75% load (L/h) 94.2
Consumption @ 50% load (L/h) 64.8
Maximum fuel pump flow (L/h) 540
0.5
0.60
OIL
Oil capacity (L)
Min. oil pressure (bar)
Max. oil pressure (bar)
Oil consumption 100% load (L/h)
Oil sump capacity (L)
508
52
HEAT BALANCE
Heat rejection to exhaust (kW)
Radiated heat to ambient (kW)
Heat rejection to coolant (kW)
243
220
AIR INTAKE
Max. intake restriction (mm H2O)
Intake air flow (L/s)
553
34
-
-
1500
7.1
112
-
-
-
Air/Air DC
18.27
This document is not contractual - Kohler Co. reserves
the right to modify any of the characteristics without notice, in a constant effort to improve the quality of its products.
GBD5-05014 (KH630) 03/17
-
-
16
10.5
-
Glycol-Ethylene
-