Product Card

KM16
ENGINE CHARACTERISTICS
MITSUBISHI
S4L2-SD
Athmo
L
4
1.76
-
78 x 92
22 : 1
1500
4.6
15.8
+/- 2.5%
6.5
GENERAL ENGINE DATA
Engine model
Engine type
Air inlet
Cylinders arrangement
Number of cylinders
Displacement (L)
Charge Air coolant
Bore (mm) x Stroke (mm)
Compression ratio
Speed (RPM)
Pistons speed (m/s)
Maximum stand-by power at rated
RPM (kW)
Frequency regulation. steady state (%)
BMEP (bar)
Governor type
Mechanical
COOLING SYSTEM
Radiator & Engine capacity (L)
4.9
Max water temperature (°C)
-
Outlet water temperature (°C)
-
Fan power (kW)
0.7
Fan air flow w/o restriction (m3/s)
0.8
Available restriction on air flow (mm
Water Column)
10
Type of coolant
Glycol-Ethylene
Thermostat (°C)
-
100
120
-
EMISSIONS
Emission PM (mg/Nm3) 5% O2
Emission CO (mg/Nm3) 5% O2
Emission HC+NOx (g/kWh)
Emission HC (mg/Nm3) 5% O2
40
410
48.7
EXHAUST
Exhaust gas temperature @ ESP 50Hz (°C)
Exhaust gas flow @ ESP 50Hz (L/s)
Max. exhaust back pressure (mm H2O)
700
FUEL
Consumption @ 110% load (L/h)
-
Consumption @ 100% load (L/h)
4.4
Consumption @ 75% load (L/h)
3.4
Consumption @ 50% load (L/h)
2.6
Maximum fuel pump flow (L/h)
18
5.9
1
4
-
OIL
Oil capacity (L)
Min. oil pressure (bar)
Max. oil pressure (bar)
Oil consumption 100% load (L/h)
Oil sump capacity (L)
5.4
14
2
HEAT BALANCE
Heat rejection to exhaust (kW)
Radiated heat to ambient (kW)
Heat rejection to coolant (kW)
14
200
AIR INTAKE
Max. intake restriction (mm H2O)
Intake air flow (L/s)
18.2
This document is not contractual - Kohler Co. res
erves the right to modify any of the characteristics without notice, in a constant effort to improve the quality of its products.
GBD5-02010 (KM16) 03/17