Homeowners Guide

Temperature – Set the Default

IMPORTANT! For systems with both a bath ﬁller and shower:

When setting the temperature, set the default for comfortable

showering; adjust the bathing temperature manually as needed.

Program 6: Set the start-up temperature of the shower.

The factory default is 100°F (38°C). The minimum temperature setting

is 86°F (30°C).

NOTE: The maximum default temperature setting is the limit

speciﬁed in program 7, up to 120°F (49°C).

Choose ″Prog 6″ from the settings menu.

Use the [Up] or [Down] icon to set the default temperature. Press

the [Power] icon to set.

Press the [Power] icon again to return to the settings menu.

Refer to the ″Settings Menu″ section to access other settings or

exit the menu.

Set your preferred

default temperature.

1214635-5-A 14 Kohler Co.