Homeowners Guide

Water Outlets – Set the Default (K-527, K-527-E)
Program 9: Determine the default outlet(s) that will turn on at shower
start-up.
The factory default is outlet 1.
NOTE: Both outlets (b) is only an option for K-527. Both outlets
must be enabled (Prog 8) for ″b″ to appear as an option. See the
″Water Outlets – Set Active Outlets″ section.
Choose ″Prog 9″ from the settings menu.
Use the [Up] or [Down] icon to choose the outlet(s) that will turn
on at shower start-up; ″1″ for outlet 1, ″2″ for outlet 2, or ″b″ for
both outlets (K-527 only). Press the [Power] icon to set.
Press the [Power] icon again to return to the settings menu.
Refer to the ″Settings Menu″ section to access other settings or
exit the menu.
Choose default outlets: outlet 1 (1),
outlet 2 (2), or both (b).
Kohler Co. 17 1214635-5-A