Homeowners Guide

Using Your Shower (cont.)
Press and hold the [Down] icon to decrease the temperature 1°F
(0.5ºC) every 0.5 seconds.
Increase the Temperature
Press the [Up] icon to increase the temperature in 1°F (0.5ºC)
increments up to 106°F (41°C).
NOTE: For temperatures of 106°F (41°C) and above, the system will
only allow icon presses that are 2 seconds or more apart.
Press and hold the [Up] icon to increase the temperature 1°F
(0.5ºC) every 0.5 seconds up to 106°F (41°C); and every 1 second
for temperatures above 106°F (41°C).
Pausing Your Shower/Bath Filler
Press the [Power] icon for less than 2 seconds to pause the
system. To resume showering, press the [Power] icon again.
The shower will keep the current temperature settings if resumed
within 2 minutes. If the shower is not resumed within 2 minutes,
the system will automatically turn OFF.
Change Active Water Outlets
K-527: Your system may be set for single or dual-outlet operation.
Press the [Outlet] icon to toggle between the two outlets or allow
both to flow at the same time. Refer to the ″Water Outlets – Set
Active Outlets″ section.
K-558: Your system may be set for single or multiple-outlet
operation. Press the [Outlet] icon to toggle between the three
outlets or allow all to flow at the same time. Refer to the ″Water
Outlets – Set Active Outlets″ section.
K-527-E: Press the [Outlet] icon to toggle between the two outlets.
K-558-E: Press the [Outlet] icon to toggle between the three
outlets.
1214635-5-A 6 Kohler Co.