Installation Guide

3. Installing the K-264 Handles
IMPORTANT! Risk of product damage. To avoid damaging the
ceramic caps, do not overtighten the flathead screws.
If replacing the ceramic trim, loosen the setscrew(s) and pull the
handle off the bonnet.
For new and replacement installations, place the ceramic cap into
the oval handle, and secure from underneath with a flathead
screw.
Align and place the handle assembly onto the bonnet and secure
with a setscrew.
Setscrew
Bonnet
Oval Handle
Ceramic
Cap
Flathead
Screw
Kohler Co. 5 110424-2-AC