Installation Guide

1. Install The Supply and Stop
Remove the nipple from the body assembly. Wrap thread sealant
tape around the threads on both ends of the nipple.
Thread one end of the nipple back into the body assembly.
Tighten with a clean strap wrench.
Slip the escutcheon over the other end of the nipple. Thread the
body assembly and nipple into the water supply. Make sure the
water outlet on the body assembly is facing straight up.
For Model K-7653: Loosen the nut on the body assembly outlet
and insert the plain end of the supply tube. Tighten the nut with
a wrench.
For Model K-7654: Remove the nut and sleeve from the body
assembly. Attach the hose to the body assembly. Tighten with a
wrench.
Connect to the water closet water supply.
Hose,
(K-7654)
Body
Assembly
Supply
Tube,
(K-7653)
Nut
Nipple
Escutcheon
Kohler Co. 3 105225-2-AB