Battery - Safety Data Sheet

中能锂电科技泰州有限公司
ZHONGNENG LITHIUM BATTERY TECHNOLOGY TAIZHOU
CO., LTD
江苏省泰州市中国医药城药城大道
799
号
NO.799,YAOCHENG AVENUE, CMC, TAIZHOU CITY,
JIANGSU
Tele: 0086-523-86226716
Fax: [phone]
MATERIAL SAFETY DATA SHEET
Issue:
Charlie Chen Doc No: ZN-MSDS-18-001 Issue Date:2020.05.05
ZN confidential
Cells and/or batteries at a SOC of greater than 30% of their rated capacity
may only be shipped with the approval of the State of Origin and the State of the
Operator under the written conditions established by those authorities.
Packages prepared according to Section of PI965 must be offered to the operator
separately from other cargo and must not be loaded into a unit load device before
being offered to the operator.
The lithium core and battery goods required by the packaging specification
PI965 and PI968 II shall not be packed in the same outer package as other dangerous
goods.
Ban lithium ion battery (UN 3480, PI965 Section IA or IB) and lithium batteries
(3090, UN PI968 Section IA or IB) with category 1 explosive material (except
ammunition) 1.4, 2.1 flammable gas, flammable liquid, 4.1 3 flammables solid, 5.1
class antioxidant and other dangerous goods packaging in the same package.
Do not damage or mishandle this package. If package is damaged, batteries must
be quarantined, inspected, and repacked. Cells and batteries identified by the
manufacturer as being defective for safety reasons, or that have been damaged, that
have the potential of producing a dangerous evolution of heat, fire or short circuit are
forbidden for transport. w aste lithium batteries and lithium batteries being
shipped for recycling or disposal are prohibited from air transport unless approved
by the appropriate national authority of the State of origin and the State of the
operator.
The lithium battery should pass the UN38.3 test, if the battery cannot pass the
testing, it cann ot transport, should redesign. If the batteries through the test, for
the lithium battery only, follow the UN3480 and the packing requirements for PI965,
for the lithium battery which installed in equipment, follow the UN3481 and the
packing requirements for PI967.
The lithium battery testing meets all requirements under UN Manual of Tests and