Installation & Assembly

2. Hardware Placement for K-99686 and K-99689
Measure and mark the dimensions for the hardware as shown
above.
Drill a 3/16″ (21 mm) hole at each marking.
Insert a screw through each hole from the inside. Count the
number of notches that appear from the other side.
Remove the screw. Using a pair of side cutters, cut the screw at
the appropriate notch. Repeat for all screws.
1"
(25 mm)
Centered
Side to Side
4-5/8"
(117 mm)
K-99686 and K-99689
3" (76 mm)
4-5/8"
(117 mm)
K-99689
4-5/8"
(117 mm)
3" (76 mm)
4-1/4"
(108 mm)
1216526-2-F 4 Kohler Co.