Owner Manual

Music – Bluetooth Input
Path: music > input > Bluetooth
Function: enables access to a signal from an audio device with a Bluetooth connection to the amplifier.
NOTE: To see the [music] icon on the interface home screen, the K-99696 amplifier must be installed and
connected to the system controller. To hear audio signals through the amplifier, speakers must be properly
connected to the amplifier. Refer to the amplifier Installation and Care Guide.
NOTE: All settings for Bluetooth pairing are controlled on the embedded Web pages. Refer to the ″Web
Settings – Music″ section.
From the home screen, touch the [music] icon.
Touch the [input] tab.
Touch the [Bluetooth] option. A Bluetooth device can now be paired.
NOTE: The amplifier will display on the device as ″Kohler KA02.″ If a BLUETOOTH pin is required,
enter ″0000.″
When the device is paired and connected, the device ID (name) is shown in place of the ″Bluetooth″
option, and the LED on the amplifier will blink blue.
Once a signal is detected from the Bluetooth device, the LED on the amplifier will turn solid blue.
To disconnect from the Bluetooth device, touch the device ID. A pop-up will appear to allow
disconnection.
music
8:32am
home
listen input
line-in 1
line-in 2
Bluetooth
music
8:32am
home
listen input
line-in 1
line-in 2
Device ID
music
8:32am
home
listen input
line-in 1
line-in 2
Device ID
options
Connected to
Device ID.
Disconnect?
ok
Kohler Co. 69 1241234-5-A