User Manual

Plunger Assembly Adjustment
NOTE: Adjust the plunger assembly until it is at the proper height.
Remove the hood from the overflow ell.
Remove the pin on the plunger assembly from the hood.
Remove the plunger assembly from the overflow ell.
Remove the pin from the link, then reinsert the pin at the proper
height.
Reinsert the plunger assembly into the overflow ell.
Reinstall the hood to the overflow ell.
Verify proper operation of the lever.
Care and Cleaning
For best results, keep the following in mind when caring for your
KOHLER product:
Linkage
Rod
Plunger
Assembly
Hood
Overflow Ell
Plunger AssemblyBath Drain
Pin
1114757-2-B 8 Kohler Co.