Installation Guide

Tools and Materials
Before You Begin
CAUTION: Risk of property damage. To support the
bedpan washer and piping, provide sufficient reinforcement
or mounting brackets as required inside the finished wall.
Observe all local plumbing codes and building codes.
Shut off the main valve and water supply.
Select flathead screws that are long enough to secure the base of
the foot control to the finished wall.
Drill and 9/16" or
larger bit
Plus:
• Seat Wrench (Kohler #21334)
• 2 1/2" IPS Pipe Nipples
• Three (3) flathead screws
• Rags
5/32"
Strap Wrench
Thread Sealant
Tape
1034416-2-C 2 Kohler Co.