Installation Guide

4. Installation Checkout
NOTE: If the height of the foot pedal(s) needs to be adjusted,
follow the procedure below.
Remove the cover from the valve.
Loosen the hex nut.
NOTE: For foot controls with two pedals, both foot pedals must be
at the same height as one another.
Turn the adjustment screw counterclockwise until the foot pedal
will no longer touch the cover.
Retighten the hex nuts.
Reinstall the cover over the valve, then recheck the height of the
pedal(s).
Secure the cover to the valve with a plated screw.
Foot Pedals
Cover
Hex Nut and
Adjustment Screw
Kohler Co. 9 1034416-2-C