User Manual

JOBNAME: No Job Name PAGE: 3 SESS: 3 OUTPUT: Tue Apr 27 20:27:06 2010
Important Information (cont.)
Verify the power cord and water hose are not susceptible to damage. Ensure the clips (provided) are
attached evenly along the water hose and power cord. If the clips were not installed, attach them at
this time. This will prevent twisting or damage to the water hose and power cord and will extend
the life of the product.
NOTE: This product is designed for installation with the electrical and water supplies located through
either the wall or the floor.
Grounding Instructions
This product should be grounded. In the event of an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire for the electric current. This product is equipped
with a cord having a grounding wire with a grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded.
DANGER: Risk of electric shock. Improper use of the grounding plug can result in a risk of
electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either
flat blade terminal. The wire with insulation having an outer surface that is green with or without
yellow stripes is the grounding wire.
Check with a qualified electrician or service personnel if the grounding instructions are not
completely understood, or if in doubt as to whether the product is properly grounded.
Thank You For Choosing Kohler Company
Thank you for choosing Kohler Co. Your Kohler Co. product reflects the true passion for design,
craftsmanship, artistry, and innovation Kohler Co. stands for. We are confident its dependability and beauty
will surpass your highest expectations, satisfying you for years to come.
All information in this guide is based upon the latest product information available at the time of
publication. At Kohler Co. we strive to fulfill our mission of improving the level of gracious living for each
person who is touched by our products and services. We reserve the right to make changes in product
characteristics, packaging, or availability at any time without notice.
Please take a few minutes to review this guide. Pay special attention to the care and cleaning instructions.
Manual Operation
The basic functions of the toilet can be controlled manually using the buttons located on the right side of
toilet.
The lid and ring can be lifted manually to open and close them.
Push the flush button will flush the toilet manually.
Push the front wash button to active the bidet wand for front wash.
Push the back wash button to active the bidet wand for front wash.
Push the dryer button to activate the dryer.
Care and Cleaning
Kohler Co. shall not be responsible or liable for any tank fitting damage caused by the use of cleaners
containing chlorine (calcium hypochlorite).
NOTE: When manually cleaning the bowl or wand, the remote must be used to extend the wand or open
the bowl valve.
Cleaning Functions
To activate the cleaning functions:
On the home screen menu of the remote, select settings.
In the settings menu, select cleaning.
Kohler Co. 3 1132336-5-A
Graphic and more
specific information will
be added here.