User's Manual

JOBNAME: No Job Name PAGE: 11 SESS: 17 OUTPUT: Tue Apr 29 07:42:31 2014

Using the Remote Control (cont.)

Using the User Presets

When [preset 1] or [preset 2] is selected when you are seated,

front wash, rear wash, or air speed will operate at your stored

settings.

If the preset icon is pressed while the seat is occupied, the seat

will gradually (approximately 2 minutes) change to the preset

temperature.

Synchronizing the Remote Control

NOTE: Synchronize the remote control to reestablish a lost

connection. When there is no connection, the remote control screen

ﬂashes steadily.

NOTE: Charge the remote control on the docking station before

performing these steps.

Press and hold the silver button on the top of the remote control

for 3 seconds.

The remote control will start up, and ﬂash regularly.

Press and hold the power button on the top of the remote control.

Select the [dryer] icon until a short beep is heard.

Repeat if the remote control did not successfully synchronize with

the bidet seat.

Kohler Co. 11 1194356-5-A