User's Manual

Using the Bidet Wash Functions
NOTE: The bidet function will automatically stop after 5 minutes.
NOTE: Bidet functions can also be activated using the side controls on the toilet.
Using the Front Bidet Wash
Press the ″Front″ icon.
Press the ″Stop″ icon to end.
Using the Rear Bidet Wash
Press the ″Rear″ icon.
Press the ″Stop″ icon to end.
Adjusting the Water Temperature
NOTE: Adjust the water temperature while the rear or front wash are in use.
Press the ″Water Temp″ icon.
Press the icon as needed to increase or decrease the water temperature.
There are five settings available. The blue points to the left of the icon indicate the setting the water
temperature is on.
Adjusting the Water Pressure
NOTE: Adjust the water pressure while the rear or front wash are in use.
Press the ″Pressure″ icon.
Press the icon as needed to increase or decrease the water pressure.
There are five settings available. The blue points to the left of the icon indicate the setting the water
pressure is on.
Adjusting the Wand Position
NOTE: Adjust the wand position while the rear or front wash are in use.
Press the ″Wand″ icon.
Press the icon as needed to increase or decrease the wand position.
There are five settings available. The blue points to the left of the icon indicate the setting the wand
position is in.
Wand Position
Spiral
Water Pressure
Massage
"Front" Bidet
Wash
"Rear" Bidet
Wash
Bidet Water
Temperature
Seat temp Flush-fullFlush-ecoSeat
Clean Dryer RearFront
PressureandWSpiralMassageater tempW
Stop
Cover
UV
Kohler Co. 11 1226974-5-A