Owner's Guide

Manual Operation
NOTE: When the cleansing wash features are activated from the control panel, they will default to the
middle temperature, pressure, and wand position settings.
Front Wash - Press the icon to activate front wash. Washing will stop automatically after 5 minutes
or can be stopped by pressing the Stop icon.
Rear Wash - Press the icon to activate rear wash. Washing will stop automatically after 5 minutes or
can be stopped by pressing the Stop icon.
Stop - Press the icon to stop front wash, rear wash, dryer and deodorizer features.
Flush - Press the icon to manually flush the toilet. When the power to the toilet is off, press and
hold the icon for 2 seconds to flush. To flush during a power outage, pour a 2-gallon bucket of
water into the bowl.
Low Light Sensor - Senses low light levels and turns the nightlight on when the automatic feature
is enabled. To enable or disable the nightlight, refer to the ″Enable/Disable Automatic Features″
section.
Standby Mode - To conserve energy, press and hold the Stop icon until a beep is heard. The
automatic cover open/close feature, remote control functionality, and heated seat options are
deactivated. Press any icon on the control panel to reactivate the features.
Front
Wash
Rear
Wash
Seat
Sensor
Area
Spray
Wand
Control
Panel
Flush
Low Light
Sensor
Stop
1295780-5-A 4 Kohler Co.
PROOF