Owner's Guide
Docking
Station Cover
Stop
Dryer
Pair Button
Remote Control
Back Plate
Kohler Co. 7
1411744-5-B
Remote Control - Setup
Verify that three AAA baeries are properly installed in the docking station. Remove the screw from the boom of the
cov
er to access the baery compartment.
Verify that three AA baeries are properly installed in the remote control. Twist and remove the back plate of the
remote control to access the baery compartment.
Place the remote control on the docking station.
The remote control is fully charged when the indicator lights above the front and rear wash icons are no longer orange.
Move the remote control within close proximity to the toilet.
Press and hold the dryer icon on the remote control until the indicator lights above the icon ash.
Press the pair buon
on the back of the toilet. When pairing is successful, the indicator lights will stop ashing.
Charging the Remote Control
NOTE: The remote control must be charged to operate. When charging is needed, the indicator lights above the front and
rear wash icons will be orange.
Pairing to the Toilet
NOTE: The remote control cannot be paired while the toilet is occupied.
PROOF