Rough In Guide

4” 3-3/4”
8-1/2”
9”
1-1/2”
2”
15/16”
3-3/8” MAX.
3-5/8”
1-1/2” MIN.
2” MAX.
2-7/8” MIN.
K-T194=6-1/4”
K-T196=8-1/4”
K-T198=10-1/4”
14
5/8” O.D.
HOT SUPPLY
5/8” O.D.
COLD SUPPLY
2-1/2” D.
3-5/8”
1-1/2”
3-1/2”
2-1/2” MAX.
2” MIN.
5-1/2”
1-3/4” D.
1-7/8”
LEVER
K-T194=2-3/8”
K-T196=3-1/8”
K-T198=3-7/16”
NOTES:
Roughing-In

K-T194, K-T196, K-T198, K-307-K
FALLING WATER
KITCHEN/BAR/LAVATORY WALL MOUNT FAUCET
Ordering Information
Applicable faucet trim:
*6-1/4” spout with lever handle trim K-T194
*8-1/4” spout with lever handle trim K-T196
*10-1/4” spout with lever handle trim K-T198
Applicable valve:
Wall mount valve K-307-K **required
*Valve must be ordered to complete faucet.
**Required for configuration illustrated.
Lever handle is ADA compliant
ADA
Roughing-In Notes
*1-1/2” to 6” must be maintained between bottom of
spout and top of fixture rim.
Two 1-7/8” D. cut-out holes required for spout and handle.

K-T194, K-T196, K-T198, K-307-K Falling Water Faucet
116726-1-AA (-)