Rough In Guide

Product Information
Applicable product*:
7-1/4″ (18.4 cm) length spout K-T195
10-1/4″ (26 cm) length, 3/4″ OD spout K-T197
13-1/4″ (33.7 cm) length spout K-T199
Lever handle is ADA compliant.
*K-307-K wall-mount valve is required.
Required accessory:
Wall-mount valve K-307-K not shown
Installation Notes
Install this product according to the installation guide.
Install the wall-mount valve according to the valve installation
guide.
A total of two 1-7/8″ D. cut-out holes are required, one for the
spout and one for the handle.
Fixture dimensions are nominal and conform to tolerances of
ASME/ANSI standard A112.18.1.
2-1/2"
(6.4 cm) D.
5/8" OD
Hot Supply
5/8" OD
Cold Supply
1-1/2"
(3.8 cm)
2"
(5.1 cm)
5-1/2"
(14 cm)
8-1/2"
(21.6 cm)
1-1/2"
(3.8 cm)
1-3/4"
(4.4 cm) D.
1-1/2"
(3.8 cm)
3-5/8"
(9.2 cm)
3-5/8"
(9.2 cm)
9" (22.9 cm)
4" (10.2 cm) 3-3/4" (9.5 cm)
3-1/2"
(8.9 cm)
3-1/8"
(7.9 cm)
15/16"
(2.4 cm)
2" (5.1 cm) Min
2-1/2" (6.4 cm) Max
1-1/2" (3.8 cm) Min
2" (5.1 cm) Max
*1-1/2" (3.8 cm) to 6" (15.2 cm) must be maintained between
bottom of spout and top of fixture rim.
2-7/8" (7.3 cm) Min
3-3/8" (8.6 cm) Max
Lever
K-T197=10-1/4" (26 cm)
K-T199=13-1/4" (33,7 cm)
K-T195=7-1/4" (18.4 cm)
Roughing-In
K-T195, K-T197, K-T199
FALLING WATER
WALL-MOUNT FAUCET
FALLING WATER WALL-MOUNT FAUCET
086501-1-
AB