Specifications

36"
Notes
Required Electrical Service
Install this product according to the installation
instructions.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
This product is designed for installation with the
electrical and water supplies located through
either the wall or the floor.
120 V, 15 A, 60 Hz
Technical Information
If the rough-in distance is less than 12" (305mm)
the seat may strike the wall when it is opened.
All product dimensions are nominal.
One-piece, Floor-mountToilet type:
Confirm the rough-in is 12" (305 mm) before
installing the toilet.
FloorWaste Outlet:
ElongatedBowl shape:
Pressure Lite
®
Flush type:
2-7/8" (73 mm)Trap passageway:
Water Consumption
1 gpf (3.8 lpf)Full:
12" x 9-1/2" (305 mm x 241 mm)Water surface size:
4-7/8" (124 mm)Rim to water surface:
12Rough-in:
5-1/2" (140 mm)Seat-mounting holes:
Fixture Supply Requirements
20 psi (137.9 kPa)Min static pressure:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
12-28-2018 11:20 - US
Karing
®
2.0 intelligent skirted one-piece elongated toilet
K-77780