Specifications

Ø 2-3/8"
(60 mm)
Ø 1-1/4"
(32 mm)
38-3/8" (975 mm)
36" (914 mm)
1-1/2"
(38 mm)
2-3/4"
(70 mm)
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
Wall-mountInstallation Type:
WARNING: Risk of personal injury. The wall
plates on the grab bar must be mounted to a
Zinc, Stainless SteelMaterial:
brace between the wall studs. This will ensure
that the weight of the user is adequately
supported.
ADA compliant when installed to the specific
requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-24-2019 05:49 - US/CA/MX
Components
™
36" grab bar
K-25161