Specifications

Pinstripe
®
Bath and Shower Trim Set
K-T13133-4B
1/2" IPS
11-1/4"
(286 mm)
Max
1/2"-14
NPT
6-7/8" (175 mm)
48" (1219 mm)
To Floor
(Shower Only)
6-15/16"
(176 mm)
6-11/16" (170 mm)
6"
(152 mm)
3-7/8"
(98 mm)
72" (1829 mm) To
78" (1981 mm)
To Floor (Typical)
10"
(254 mm)
To Spout
(Bath Only)
4"
(102 mm)
3-7/8"
(98 mm)
Top Of
Bath
3"
(76 mm)
Technical Information
All product dimensions are nominal.
Showerhead/Body Spray:
Rated maximum
flow:
2.5 gal/min (9.5 l/min)
Notes
Install this product according to the installation
guide.
Avoid cross-flow conditions. Do not install shut-
off device on either valve outlet.
Cap the shower outlet if deck-mount spout,
diverter, or handshower is connected to the
spout outlet.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and wall-mount spout.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-13-2021 12:48 - US/CA