Product Manual

KohlerPower.com33 590 04 28

700-109a

700-006a

AE00972

Engine oil replacement

WARN I N G

Avoid draining the engine oil immediately after

stopping the engine. The oil is hot and should be

handled with care to avoid burns.

1. Place the generator on a level surface and warm

up the engine for several minutes.

Then stop the engine.

2. Remove the oil filler cap.

1 Oil filler cap

3. Place an oil pan under the engine. Remove the oil

drain bolt and gasket so that the oil can be com-

pletely drained.

2 Oil drain bolt

3 Gasket

4. Check the oil drain bolt, oil filler cap and O-ring.

Replace them if damaged.

4 O-ring

5. Install a new gasket and the oil drain bolt, and

then tighten the bolt.

Oil drain bolt tightening torque:

17 Nm (1.7 m·kgf, 12 ft·lbf)

6. Add engine oil to the correct level.

NOTI CE

Be sure no foreign material enters the crankcase.

5 Correct level

7VU-28199-L1.indd 28 2014/01/09 10:16:03