RXT Transfer Switch Spec Sheet

KOHLER CO., Kohler, Wisconsin 53044 USA
Phone [phone], Fax [phone]
For the nearest sales and service outlet in the
US and Canada, phone [phone]
KOHLERPower.com
 2014 Kohler Co. All rights reserved.
DISTRIBUTED BY:
Availability is subject to change without notice. Kohler Co. r eserves the
right to change the design or specifications without notice and without
any obligation or liability whatsoever. Contact your local Kohlerr
generator distributor for availability.
Model
RXT: Kohler Automatic Transfer Switch
Controls
J: Interface for RDC2/DC2 Controller
(standard or combined interface/ load
management)
Voltage/Frequency
C: 208 Volts/60 Hz (3-phase only)
F: 240 Volts/60 Hz
M: 480 Volts/60 Hz (3-phase only)
Number of Poles/Wires
N: 2-pole, 3-wire, solid neutral (120/240 V only)
T: 3-pole, 4-wire, solid neutral
V: 4-pole, 4-wire, switched neutral
Model Controls Voltage Poles Enclosure Current Rating Connections
Record the transfer switch model designation in the boxes. The transfer switch model designation defines ratings and
characteristics as explained below.
Sample Model Designation: RXT-JFNC-0200A
Enclosure
A: NEMA 1 *
C: NEMA 3R
* NEMA 1 enclosure is available on 100 amp load center models only.
Current Rating
Connections
A: No load center
B: With load center (100 amp single-phase only)
ASE: Service entrance rated
CSE: Service entrance rated with CSA certification
(100/200 amps only)
0100: 100 amps
0150: 150 amps
0200: 200 amps
0300: 300 amps
0400: 400 amps
G11-140 (Model RXT Automatic Transfer Switch) 3/20g Page 8
Model Designation