RXT Transfer Switch Manual

TP-6807 1/1636 Section 4 Service Disconnect, SE Model
4.2 Source Circuit Breaker Reset
The utility source circuit breaker can trip due to an
overcurrent condition. Identify and correct the cause of
the overcurrent condition before resetting the circuit
breaker. Contact a local distributor/dealer for service if
necessary.
When the circuit breaker trips, the handle moves to an
intermediate position. To reset a tripped circuit breaker,
move the handle to the extreme OFF position and then
to the ON position.
1
GM80015
1. Normal/utility circuit breaker
2. Padlock hasp
2
Figure 4-1 Service Entrance Model, Door Removed