Rough-In Guide

Product Information
Applicable product:
Freestanding bath with straight apron K-6368
Fixture*:
Bathing well:
Basin area,
bottom
24-3/4″ (629 mm) x 45-1/4″ (1149 mm)
Basin area, top 27-1/4″ (692 mm) x 56″ (1422 mm)
Weight 117 lbs (53.1 kg)
To overflow:
Water depth 17″ (432 mm)
Capacity 88 gal (333 L)
* Approximate measurements for comparison only.
Recommended accessories:
Toe-tap bath drain - with brass tee and pipe K-7265
PVC cable bath drain - less tee and pipe K-37385
Required accessories (for K-37385 cable drain only):
Drain trim - Basic Rotary OR K-T37391
Drain trim - Contemporary Rotary OR K-T37392
Drain trim - Traditional Rotary OR K-T37393
Drain trim - Victorian Rotary OR K-T37394
Drain trim - Contemporary Push OR K-T37395
Drain trim - Traditional Push OR K-T37396
Drain trim - Victorian Push K-T37397
Installation Notes
Install this product according to the installation guide.
CAUTION: Risk of personal injury. Obtain
sufficient help to carefully lift or move the bath.
This bath is designed for freestanding installation only.
Do not support the load weight of the bath by the rim.
Floor support under bath must provide for a minimum of 80
lbs/square foot (390.6 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to CSA B45.5/IAPMO Z124. All dimensions
are nominal.
3"
(76 mm)
33" (837 mm)
18"
(457 mm)
No change in measurements if connected
with drain illustrated. (K-7265)
Lumbar
Angle 20˚
36" (914 mm)
66" (1672 mm)
4"
(102 mm)
17"
(432 mm)
4-1/2"
(114 mm)
25-3/4"
(654 mm)
Roughing-In
K-6368
FREESTANDING BATH WITH STRAIGHT APRON
FREESTANDING BATH WITH STRAIGHT APRON
1214187-1-
A