How to Guide

Product Information
Applicable valve: Handles are ADA compliant.
Shower only trim*, sculpted
lever handle, showerhead
K-T10276-4 shown
Shower only trim*, traditional
lever handle, showerhead
K-T10276-4A shown
Valve only trim*, sculpted
lever handle
K-T10277-4 shown
Valve only trim*, traditional
lever handle
K-T10277-4A shown
Sculpted NPT diverter bath
spout
K-10280-4 not shown
Traditional NPT diverter bath
spout
K-10280-4A not shown
Sculpted slip-fit diverter bath
spout
K-10281-4 shown
Traditional slip-fit diverter
bath spout
K-10281-4A not shown
*Rite-Temp valve must be ordered to complete faucet.
Recommended Accessories
HiFlow Rite-Temp thin wall installation kit* 88526
* For K-306-KS valve in a fiberglass or acrylic installation.
Required Accessories
Rite-Temp valve without stops OR K-304-K
Rite-Temp valve with stops OR K-304-KS
HiFlow Rite-Temp valve with stops OR K-306-KS
Rite-Temp valve with PVC connections OR K-304-KP
Optional Accessories
Forté deep roughing-in kit for Rite-Temp valve 1025388
Installation Notes
WARNING: Risk of damage to the K-306-KS
valve assembly. When using the K-306-KS valve
in a fiberglass or acrylic installation, use the thin
wall installation kit (88526).
Install this product according to the installation guide.
Install Rite-Temp valve according to valve installation guide.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Cap shower outlet if deck-mounted spout, diverter, or
handshower is connected to the spout outlet.
Install straight pipe or tube drop of 7″ (17.8 cm) to 18″ (45.7
cm) with single elbow between valve and wall-mount spout.
Sculpted
Sculpted
Traditional
72" (182.9 cm) –
78" (198.1 cm) to
Floor (Typical)
4" (10.2 cm)
2-7/8"
(7.3 cm)
3"
(7.6 cm)
10" (25.4 cm)
to Spout
(Bath Only)
48" (121.4 cm)
to Floor
(Shower Only)
Top of Bath
5-1/4" (13.3 cm)
5-1/4" (13.3 cm)
Traditional
5-1/4" (13.3 cm)
6"
(15.2 cm)
6"
(15.2 cm)
6-3/8"
(16.2 cm) D.
For slip-fit spout, tubing must
extend 2-1/8" (5.4 cm) Min;
3-1/2" (8.9 cm) Max beyond
finished wall.
For 1/2" NPT spout, pipe
must extend 4-1/2" (11.4 cm)
beyond finished wall.
1/2"-14 NPT
Roughing-In
K-T10276, K-T10277, K-10280, K-10281
FORTÉ
®
RITE-TEMP
®
PRESSURE-BALANCING BATH AND SHOWER VALVE TRIM
FORTÉ
®
RITE-TEMP
®
PRESSURE-BALANCING BATH AND SHOWER VALVE TRIM
1018257-1-
G