Dimensions Guide

Features

•

For use with valves with a diverter

•

Complements Pinstripe

Suite

•

Cross handle

•

Requires a Rite-Temp

pressure-balancing valve

Material

•

Premium material construction

Installation

•

Wall-mount

Required Accessories

K-11748 Series Rite-Temp® Valves

Adapters, Rough-in and Extension Kits

1061794

Codes/Standards

ASME A112.18.1/CSA B125.1

ASSE 1016

ADA

ICC/ANSI A117.1

KOHLER

Faucet Lifetime Limited

Warranty

See website for detailed warranty information.

Available Color/Finishes

Color tiles intended for reference only.

DescriptionCodeColor

Polished ChromeCP

Vibrant® Polished NickelSN

Vibrant® Brushed NickelBN

Vibrant® Brushed BronzeBV

USA/Canada: 1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

8-31-2017 07:26

Pinstripe

Valve Trim Set

K-T98757-3A

PAGE 1
Pinstripe® Valve Trim Set K-T98757-3A Features • • • • For use with valves with a diverter Complements Pinstripe® Suite Cross handle Requires a Rite-Temp® pressure-balancing valve Material • Premium material construction Installation • Wall-mount Required Accessories K-11748 Series Rite-Temp® Valves Adapters, Rough-in and Extension Kits 1061794 Codes/Standards ASME A112.18.1/CSA B125.1 ASSE 1016 ADA ICC/ANSI A117.
PAGE 2
Pinstripe® Valve Trim Set K-T98757-3A Top Of Rim Technical Information All product dimensions are nominal. Notes Install this product according to the installation guide. Avoid cross-flow conditions. Do not install shut-off device on either valve outlet. Cap the shower outlet if deck-mount spout, diverter, or handshower is connected to the spout outlet. Install straight pipe or tube drop of 7" (178 mm) to 18" (457 mm) with single elbow between the valve and wall-mount spout.