- Koldfront - A Living Direct Brand Ice Maker User Manual
KoldFront Built-in Ice Maker 14
Control Panel (rear of unit)
Descriptions of LEDs and buttons:
1. Ice Full (Red) LED: Ice Full indicator light.
When this LED is lit, the ice storage bin is full of ice or there is
something obstructing the ice-full probe. The unit will stop working.
When ice cubes are taken out of the ice storage bin, clearing the
ice-full probe, the red LED will keep flashing for 3 minutes.
Then the unit will restart and return to the ice making mode.
2. Ice Making (Green) LED: Ice Making indicator light.
When this LED is lit, the unit is working in the Ice Making mode
controlled by a temperature probe on the evaporator. When the
green LED is flashing, the unit is working in the Ice Making mode
controlled by a fixed timer.
3. Ice Harvest (Yellow) LED: Ice Harvest indicator light.
When this LED is lit, the unit is working in the Ice Harvest mode
controlled by the ice-full probe. When the green and yellow LEDs
are lit, the unit is working in the cold preservation stage.
4. Mode button: Mainly for service. When this button is pressed,
unit can change from Ice Making mode to Ice Harvest mode, or
from Ice Harvest mode to Ice Making mode. You can judge the
mode from the status of the green and yellow LEDs.
5. Ice size adjust: Turn the screw clockwise, and the size of
individual ice cubes will be larger in the next cycle; the cycle time
will be longer. Turn the knob counterclockwise, and the ice size will
be smaller in the next cycle.
IMPORTANT:
• It is not recommended that the ice size be adjusted unnecessarily
since this could
damage the machine’s controls.
• Do not let water contact the control box.
Major Functions
1. Completely automatic operation.
2. When the ice storage bin is full, the machine stops making ice
and proceeds to the cold preservation stage automatically. It starts
making ice again once the cubes are removed.
3. The different colors of the LED display indicate various operating
modes.
4. The fan motor responds to the ambient temperature. If it is cold,
the motor will stop working to keep the cooling system in good
working condition.
5. Ice cube size is adjustable.
6. A sensitive probe and accurate timer enhance the performance
of the ice maker.
7. Built-in compressor protection system.