Portable Air Conditioner PACI12020HSV Owner’s Manual For more information on other great Koldfront or EdgeStar products on the web, go to http://www.edgestar.com To use the self-diagnostic tool, go to https://support.edgestar.com V2.
Important Safety Information Improper handling can cause serious damage to the Koldfront Portable Air Conditioner and/or injury to the user. Please read the following safety information. ELECTRICAL SAFETY This unit is designed for indoor use only. Do not use the unit in extremely humid or wet environments. Do not wet the housing or control panel. Do not pull the unit by the cord. Always turn the unit off and unplug it from the socket when cleaning.
Operation of Safety Plug Note: Electrical products should not be disposed of with household waste. Please contact your local recycling center for more information about how to recycle electronic waste. Your portable air conditioner is supplied with a Leakage-Current Detection and Interruption (LCDI) safety plug. This device provides protection to reduce the risk of fire due to arcing faults in the power supply cord.
Table of Contents Important Safety Information ................................................................................................................ ii Operation of Safety Plug ........................................................................................................................iii Table of Contents....................................................................................................................................iv Introduction ...................................
First Time Operating Instructions: Before use, make sure all packaging labels and materials are removed from the unit. Be sure to keep track of all included parts and pieces before discarding packaging materials. It is advised that you keep the original box and packaging materials in case you need to move or ship the appliance in the future. Allow the unit to stand for at least 24 hours before you use it; this allows the cooling components time to settle from transit.
Introduction Thank you for purchasing this Koldfront by EdgeStar portable air conditioner. We hope that this purchase will be the beginning of a lasting and rewarding relationship between you and EdgeStar. We will provide the customer support and exemplary products necessary to nurture that relationship. This manual contains important information regarding the proper installation, use, and maintenance of your portable air conditioner.
Parts Identification FRONT VIEW BACK VIEW Caution: Make sure the drain plug is firmly installed before using the unit to prevent leaking.
Window Kit Installation Instructions PREPARATIONS FOR INSTALLING THE WINDOW KIT You must vent your portable air conditioner when running it in cooling mode or heat mode (certain models). Your unit includes a window exhaust kit that can be used to vent the unit out of a window. Before you begin, make sure you have all the parts necessary for installation.
INSTALLATION LOCATION If you have multiple windows, choose one that is near an electrical outlet that will be able to provide sufficient power to your unit. See the power requirements listed on the product label printed on the side, or on the back of your portable air conditioner. Your window kit can be installed on a horizontal or vertical sliding window as shown in the following pictures: Note: Exhaust Covers may be attached to the Grated Adapters. You may need to twist and pull apart to separate them.
2. Secure the grated adapters by fastening the screws from the flat side of the window kit plate to the holes on the grated adapter. INSTALLING THE WINDOW PLATES 3. Open your window and place the window kit on the window sill with the grooved side facing outward. Then, slide the window kit plate to fit the width of the window. You can use screws to secure the window kit plate from sliding. 4. Lower the window to secure the window kit in place. You may need to use duct tape to better secure the window kit.
ATTACHING THE DUCT CONNECTORS TO THE EXHAUST HOSE 5. Attach the connectors to the hose. A. Extend the ends of the exhaust hose B. Thread the duct connector on by turning it clockwise until it stops. A. B. 6. Roll the unit towards the window kit. Leave a space that is at least 20 inches to the wall. CONNECTING THE DUCT CONNECTOR TO THE UNIT 7. Align the slots on the duct connector to the tabs and snap the duct connector into the back of the unit.
CONNECTING THE DUCT CONNECTOR TO THE GRATED ADAPTER 8. Align the slots on the duct connector to the tabs on the grated adapter and snap the duct connector into place. After you have installed the exhaust hose and window kit, you can plug in your portable air conditioner and start using it. NOTES ABOUT THE EXHAUST HOSE Your portable air conditioner is designed to exhaust condensate water that is collected from the air.
Draining the Unit When the portable air conditioner is in cooling mode, dehumidify mode, or heat mode on certain models, it will remove moisture from the air. The condensed water from the air will be collected in an internal reservoir and will be evaporated and exhausted out of the exhaust hose. However, in very humid conditions, the internal reservoir may fill completely. This causes the air conditioner to turn off to avoid overflowing the internal reservoir.
Misting Drain Your unit also includes the unique Misting Drain option. If a drain is not present this option will allow the unit to remove the excess moisture out of the exhaust hose through a mist nozzle. The mist nozzle MUST be setup in the exhaust hose and NOT the intake hose. In order to run the misting drain option you will need to do the following: 1. Connect the included water line to the unit. You will need to attach the quick connect adapter on the end of the water line to the back of the unit.
4. Attach the mist nozzle to the grated adapter. Make sure the mist nozzle is directed to mist outside of the window and not back into the exhaust hose. The unit will now automatically mist any excess water to the outside. Installing the mist system in the exhaust hose ensures all of the moisture is pushed completely away from the window. Note: It is recommended to attach the misting nozzle in a vertical position on the grated adapter.
Operation REMOTE CONTROL OVERVIEW Button Function Power This button powers the unit on or off. Fan Speed This button sets the fan speed. The Automatic, High, indicator will appear depending on the mode you set. Mode This button sets the mode. The Automatic, Cool, Dehumidify, heat indicator will appear depending on the mode you set. (Down) This button decreases the Temperature, Timer, or Clock settings.
INSTALLING THE BATTERIES 1. Remove the cover on the back of the remote control. 2. Insert the batteries with the (+) and (-) ends pointing in the correct direction. 3. Slide the cover back on. Caution: Use only AAA batteries. Remove the batteries if the remote control will not be used for one month or longer. Do not attempt to recharge batteries not designed to be recharged. All batteries should be replaced at the same time. Do not mix old and new batteries.
Mode Indicator Function Automatic The unit will cool, dehumidify, or heat (some models) depending on the ambient temperature. The mode and fan speed changes automatically. The front panel lights will change to reflect the running mode. Cooling The unit will cool. The front panel lights will be blue. Dehumidify The unit will remove moisture from the air. The front panel lights will be yellow. Fan Only The unit will run as a fan and circulate air. The front panel lights will be green.
Dehumidifying Mode During the Dehumidifying mode, the unit will condense water out of the air and exhaust it through the exhaust hose. The ambient temperature in the room will probably drop by a few degrees while using the Dehumidifying mode. The front panel lights will be yellow. To operate the unit in dehumidifying mode: 1. Make sure the power cord is plugged into a power outlet. 2. Press the Power button on the remote control. 3. Press the Mode button until the dehumidify indicator is selected.
Fan Speed The Fan Speed button is used to change the fan speed while in Cooling and Fan Only modes. Press the Fan Speed button to select the fan speed. The Automatic, High, Medium, or Low indicator can be selected. Note: You will not be able to change the fan speed if the unit is in Automatic or Dehumidify mode. Clock The Clock button is used to set the Clock. To set the Clock: 1. Press and hold the Clock button until the Clock indicator starts blinking. 2. Set the time by using the Up and Down buttons.
Timer The timer can be used to either turn the unit on or off after a number of elapsed hours. The timer is adjustable between 1-24 hours in one hour increments. How to set the unit to automatically turn on: 1. Press the Timer button while the unit and remote are powered off. The On Timer [ ] indicator will be selected and the timed hour indicator will be blinking. 2. Use the Up and Down buttons to set the number of hours you want to pass before the unit turns on. 3.
Cleaning and Maintenance Clean the air conditioner and filters regularly to maximize performance and efficiency, and prolong the unit’s life. Always be sure to unplug the air conditioner from the power outlet before cleaning. CLEANING THE UNIT Use a soft dry cloth to wipe the body clean. If necessary, use lukewarm water to dampen a cloth to clean the unit. Use a soft bristle brush to clean between the vents.
Energy Saving Guide Read and follow the guide below to get the best performance and efficiency from your portable air conditioner: Do not cover the air outlet (exhaust) while the unit is in use. Do not place the unit in front of curtains or drapes to ensure that the air intake is not obstructed. Minimize the length of the exhaust hose. Make sure the exhaust hose is as straight as possible and avoid kinks or bends. Keep curtains, blinds, or drapes closed during the sunniest part of the day.
Troubleshooting Follow the troubleshooting guide below to resolve common issues. ISSUE My air conditioner is not functioning at all. POSSIBLE CAUSE The unit is not receiving power. The LCDI power cord is tripped. There is insufficient power to the unit. The water reservoir is full. The control panel is disconnected. My remote control does not work and the indicator symbols on the remote do not appear. My air conditioner is making a loud noise.
ISSUE My air conditioner is not cooling at all. POSSIBLE CAUSE The unit is not operating in cooling mode. The compressor is not on. The ambient temperature is too high. The filter may be dusty or blocked. The exhaust port is blocked. My air conditioner blows cold air, but does not lower the room temperature. The unit is not vented. The area of the room is too large. There are open windows and doors. There are too many heat sources. The room / garage may be inadequately insulated.
Specifications DESCRIPTION OF PRODUCT Portable Air Conditioner with Heater MODEL PACI12020HSV BTUs Cooling: 12,000 Heating: 10,000 VOLTAGE / FREQUENCY 115 V / 60 Hz INPUT POWER 1,000 W CURRENT 9.5 A COOLING CAPACITY (SACC) 5500 BTU COOLING CAPACITY (ASHRAE) 12000 BTU COLOR Silver and Grey COOLANT R410A TIMER 24 Hour DIMENSIONS (HEIGHT X WIDTH X DEPTH) 29 3/16” X 17 1/8” X 15 1/8” NET WEIGHT 69 Pounds Note: Technical data and performance information are provided for reference only.
New Portable Air Conditioner BTU’s You may notice that the cooling capacities (in British Thermal Units or BTU’s) labeled on portable air conditioners (PAC’s) are now lower than on models produced prior to October 1, 2017. This is because the labeling on new productions of PAC’s must follow a new federal test standard that was established by the Department of Energy: 10 CFR 430, subpart B, appendix CC. The SACC rating shown on your new PAC is a result of this new standard.
EdgeStar Limited Warranty One (1) Year Parts & Ninety (90) Days Labor This product is warranted by EdgeStar to be free from defective workmanship and materials, subject to any conditions set forth as follows: WHAT IS COVERED: LABOR: For a period of NINETY (90) DAYS from the date of original purchase, labor will be performed free of charge at an authorized EdgeStar repair facility.
