Owners Manual

5
OPERATION
Installation Check List before Operation
1. Have all packing materials and tape been removed from the
interior and exterior of the wine cooler?
2. Have the installation instructions been followed, including
connecting the machine to electricity? And has proper grounding
been installed for the wine cooler?
3. Has the machine been leveled?
4. Is the wine cooler in a location where the ambient temperature
is around 78º F all year round?
5. Is there a clearance of at least 4” at the rear, 3” at the top and
3” at the sides for proper air circulation?
Adjusting the Temperature
Front panel controls
You may adjust the temperature of the wine cooler using the front panel
controls. The temperature displayed will be in Fahrenheit. This wine cooler
is a dual zone with two separate temperature regions. The Upper Zone
range is 45°F to 54°F and the Lower Zone is 54°F to 64°. Whether your wine
cooler can reach the actual set temperature depends on the ambient
environmental conditions.
Adjusting the temperature for each zone:
Press the Up and Down buttons under either the Upper or Lower Zone to
raise and lower the temperature, respectively. The set temperature will
flash for a few seconds, and then revert to the ambient inner temperature
of the wine cooler.
LCD Display
Temperature
Adjustment
Buttons
Temperature
Adjustment
Buttons
Notes:
Allow at least 24
hours before storing
your wines and to
allow the
temperature to
acclimate.
Radio devices may
interfere with the
touch sensitive
controls and cause
the temperature
settings to change.
Move radio devices
away from the wine
cooler.