Owner's Manual

 Press or hold the Up or Down button to change the Auto Time by ½ hour

increments up to 10 hours, or 1 hour increments thereafter up to 24 hours. The control

will count down the time remaining until start.

 The selected time will register in five (5) seconds and the system will automatically

revert back to display the previous temperature setting or room temperature when the

unit is on.

To Use the Check Filter Feature:

This feature is a reminder to clean the Air Filter for more efficient operation. The LED light will

illuminate after 250 hours of operation. To reset the check filter timer and to turn off the Check

Filter indicator, simply clean the filter as indicated in the maintenance section of this manual

and press Check Filter button .

Digital Display:

Displays the set temperature in °C or °F and the Auto-Timer settings. While on Fan Only

mode it shows the room temperature.

The control panel is capable of displaying the temperature in degrees Fahrenheit or degrees

Celsius. To convert from one to the other, press and hold the Down and Up Temp/Timer

buttons at the same time for three (3) seconds.

Air Flow

Directional Louvers

The 4-way air directional louvers allow you to direct the air flow Up, Down, Left, and Right

throughout the room as needed. To adjust the air directional louvers side to side use the center

handles as you move side to side.

Note: When the unit is off there is no display.