Manual

Rev. 1
4. Attach the Wheels to the Axle Weldment using the (2) Lynch Pins provided. Place
the tire on the spindle, add the washer on the outside of the rim and pin through
the hole in the spindle and be sure to clip the ring back over the axle as shown
below!
NOTE: WASHERS ARE NOT UTILIZED FOR THE WHITE RIM TIRE ASSEMBLY.
5. To attach to the ATV simply use the clevis on the Tongue Tube and secure using
the 5/8” x 3.00” Bent Hitch Pin and R-Clip!
Washer & Lynch
Pin
Kolpin Outdoors, Inc.
205 N. Depot Street, Fox Lake, WI 53933
Phone #: (877) 9KOLPIN or [phone]
www.kolpinpowersports.com
[e-mail]