Owner manual

BXS4860 – Box Scraper Ends
No Part Name Description Qty
1 Left hand end plate assembly 1
2 Right hand end plate assembly 1
3 Bolt 5/16" x 1" 8
4 Nylock Nut 5/16" 8
5 Flat Washer 5/16" 8
6 Bent Hitch Pin 5/8" x 3" 2
7 "R" Pin - Keeper Ф3mm 2
Assembly Instructions:
1. Secure #1 and #2 (End Plates) to Rear Blade Assembly with 5/6” Bolts, Washers
and Nylock Nuts as shown in picture above.
2. Use (2) #6 (3” Bent Hitch Pins) to secure Rear Blade / Box Scraper assembly to
Accessory Tool Bar, secure Rear Blade Pivot Assembly with 5/8” x 3” Bent Hitch Pin
to Accessory Tool Bar also.
For additional assistance, please contact our customer service department at (877)-9KOLPIN or
[e-mail]
.
Kolpin Powersports, Inc. - 205 N. Depot Street - Fox Lake, MN 53933
Phone [phone] - Web: www.kolpinpowersports.com