MULTI PURPOSE PRECISION ROTARY TOOL Before you begin reading this information, please unfold the page with the illustrations and familiarize yourself with all functions of the tool. PFBS 9,6 V MULTI PURPOSE PRECISION ROTARY TOOL Kompernaß GmbH Burgstraße 21 D-44867 Bochum (Germany) Last Information Update: 10 / 2007 · Ident.-No.
6 7 1 2 3 5 4 A B 8 11 23 12 22 13 21 14 20 10 9 15 16 19 18 17 D E F G H I C
Table of content Introduction For your safety...............................................................................................................Page Proper use......................................................................................................................Page Features and equipment................................................................................................Page Included items...............................................................................
Introduction The following icons / symbols are used in this instruction manual: Read instruction manual! Watts (Effective power) Observe caution and safety notes! Wear protective gloves and safety goggles Caution – electric shock! Dangerous electric current – danger to life! Safety class II Ah Amp-hours (Battery capacity) Proper procedure and handling. n0 Rated idle running speed Keep children and other unauthorised personnel at a safe distance when using electrical tools.
Introduction / Safety 6 Spigot nut 7 Spindle lock Battery charger (see Fig. A): 8 Charging cradle with connector 9 Mains adapter 10 LED Accessories (see Fig. B): 11 6 HSS drills 12 2 Mandrels for mounting tools 13 3 Polishing wheels 14 4 Grinding wheels 15 1 Metal brush 16 1 Saw blade 17 10 Cutting wheels 18 4 Collets 19 2 Plastic brushes 20 3 Milling bits 21 2 Engraving bits 22 5 Grinding bits 23 Combination tool Q Noise and Vibration Informationen: Determined noise level with A evaluation.
Safety / Operation T o avoid danger to life from electric shock: J J A damaged drill / grinder, mains lead or plug presents a serious danger to life from electric shock. Check the condition of the drill / grinder, charger, mains lead, mains plug and battery pack at frequent intervals. Do not use a drill / grinder with damaged parts. If a dangerous situation arises pull out the mains plug from the socket immediately. Never open up the drill / grinder or equipment.
Operation J Switch the charger off for at least 15 minutes between successive charging processes. To do this pull the mains plug (mains adapter 9 ) out of the socket. Q Inserting / removing the battery pack into / out of the drill / grinder Inserting the battery pack: j Set the On / Off switch 1 to position “0”. j Insert the battery pack 3 into the drill / grinder until it engages.
Operation Setting the appropriate speed Symbols on On / off switch 1 0 Material (Drill / grinder switched off) 6 Softwood, metal 2 Plastics and low melting point materials 8 Hardwood 4 Stone, Ceramics 10 Steel Examples of appropriate tool selection Function Function Accessory Application Drilling HSS drill Drilling wood (see Fig. C) Milling Milling bits Engraving Engraving bits Polishing, derusting Metal brush 11 Various tasks, e.g.
Operation / Maintenance and cleaning / Disposal / Information Q Tips and tricks If you use press too hard you run the risk of breaking the tool or damaging the workpiece. You will achieve the best results by operating the tool at a constant rotational speed and using a low contact pressure on the workpiece. Q Information Q Service Please see the warranty documents for details of the Service Office responsible for your country.
12